ProfeElectricPlain-English electrician guides for NYC, Long Island, Westchester and northern NJ

Electrician in NYC, Long Island, Westchester & NJ › Electrical Repair: Dead Outlets, Flickering Lights and Tripping Breakers

Electrical Repair: Dead Outlets, Flickering Lights and Tripping Breakers

Free referral service: we pass your request to independent local companies. We are not a contractor and do not perform the work.

Short answer: A dead outlet or tripping breaker is often caused by an overloaded circuit, a tripped GFCI outlet or a loose connection. You can safely check the breaker and GFCI buttons yourself, but anything involving a burning smell, heat or repeated tripping needs an electrician.

Why is an outlet not working?

  • A tripped GFCI outlet elsewhere on the circuit (kitchens, bathrooms, garages and basements often share one). Press its RESET button.
  • A tripped breaker in the panel. Switch it fully off, then on.
  • A loose or worn connection behind the outlet, which needs a professional.

Why does my breaker keep tripping?

A breaker trips to prevent overheating. Common causes are too many devices on one circuit, a faulty appliance, or a short circuit. If it trips again right after resetting, stop resetting it and have it inspected.

Why are my lights flickering?

One fixture flickering is often a bulb or dimmer mismatch. Flickering throughout the home, or dimming when large appliances start, can point to loose connections or a service issue and should be checked.

Warning signs to act on now

  • Burning smell, discolored or warm outlets or switch plates
  • Buzzing or sparking
  • Shocks from fixtures or appliances

Turn off power at the main breaker if it is safe and call 911 if there is fire danger.

What to ask an electrician

  1. Will you diagnose first and give a written price?
  2. Does the repair require a permit?
  3. How will you test the circuit afterward?

See our overview of hiring an electrician for how to verify credentials.

Frequently asked questions

Why does a GFCI outlet stop working?

A GFCI trips to cut power when it detects a ground fault, and it can cut power to other outlets on the same circuit. Pressing RESET restores it; if it trips again, have it inspected.

Is it safe to keep resetting a breaker?

No. A breaker that trips repeatedly is signaling overload or a fault. Stop resetting it and call an electrician.

Should I fix an outlet myself?

Wiring work is regulated in many areas, including NYC. Basic checks such as resetting a GFCI are fine; leave wiring to a qualified electrician.

Get help near you

Free, no obligation. Your request goes to independent local companies.

By sending, you agree that we share your request with up to three local companies so they can contact you about it.